Product details:
This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22. 2 No. 157-92 intrinsically safe equipment for use in hazardous locations. High-performance, anti-static, thermoplastic material resistant to chemicals and solvents "Captured locking" set screw will not back out-prevents FOD (Foreign Object Debris). Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment. Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw. Combination of visual and mechanical polarity protection ensures correct installation of batteries. Light designed to not power on if batteries are installed incorrectly. 3 "AA" alkaline batteries reduce battery and recycling costs by 25% C4 LED technology - impervious to shock with a 50,000 hour lifetime - provides 120 lumens; runs 6.5 hours Sealed switch design protects it from corrosion caused by battery leakage. One body electronic LED module mechanically attached to electronic assembly. Smooth parabolic reflector produces a tight beam with optimum peripheral illumination. Regulated run time provides consistent performance throughout battery life O-ring sealed, dust-proof, water-tight enclosure IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray 3 meter impact resistance tested. Ergonomically designed for maximum hand comfort 7.00 in.
